Results Of "Rt+" And "Rt-" Modes - Amprobe MultiTest 2000 Manual De Usuario

AMPROBE

6.1.4. Results of "RT+" and "RT-" modes

If a resistance value
RT+ or RT- lower than
5Ω
is
detected,
instrument emits
double sound signal
indicating the positive
outcome of the test
displays a screen similar
to the screen to the
right.
Note: We recommend the use of alligator clips and to assure the alligator clips make good
contact with the conductor under test. Indeed, in this test the instrument gives as a
final result the maximum measured value of R+ or R- and using test leads instead of
alligator clips could give you faulty results due to faulty contact between the test leads
and conductor under test
The displayed result can be stored by pressing the SAVE key twice (refer to
paragraph 9.1).
LOWΩ
the
1.07Ω
a
219mA
RT+ 0.11Ω TIME: 10s
FUNC CAL
Max Resistance value of
05.06.01
R+ or R-.
Test current
Duration of the Test
↑ ↓
MULTITEST2000