Tabla de contenido
AMPROBE
1. SAFETY PRECAUTIONS AND PROCEDURES
1.1.
FORWARDS
This instrument conforms to the safety standards EN61557 and EN 61010-1 relating to
electronic measuring instruments.
ν
WARNING:
Strictly adhere to the following instructions before and during measurements:
Do not measure voltage or current in wet or dusty places;
Do not measure in presence of gas, explosive materials or combustibles;
Do not touch the circuit under test if no measurement is being taken;
Do not touch exposed metal parts, unused terminals, circuits and so on;
Do not effect any measurement in case of unusual conditions of the instrument such as
deformation, breakage, leakage of substances, absence of display reading etc;
Do not use the External power supply adapter (optional code A0050) if you notice
deformation, or breakage in the case, in the wire or in the plugs;
Pay careful attention when measuring voltages exceeding 25V in particular places
(building yards, swimming pools, etc.) and 50V in ordinary places because of the risk of
electric shock;
Use only cables and accessories approved by Amprobe;
The following symbols are used in this manual:
Caution: refer to the instructions in this manual; improper use may damage the
apparatus or its components.
For your own safety as well as that of the instrument you are
recommended to follow the procedures described in this
instruction manual and carefully read all the notes preceded by
the symbol
.
MULTITEST2000
Capítulos
Tabla de contenido
