Tabla de contenido
AMPROBE
8.6.3. "WAVE" mode
Selecting the WAVE mode the screen below will be displayed according to the settings
made as per paragraph 8.1. The screen shows the waveform of the current and the
voltage.
The symbols used are described in Tab. 3.
For eventual messages displayed see appendix 1 – MESSAGES DISPLAYED.
Following keys are enabled:
ESC:
SAVE:
ENTER/HOLD: to enable/disable the HOLD function (updating interruption) of the
27.09.00
V1
= 229.7
I1
= 132.0
pf1
= 0.98
Example of screen
to return back to METER mode (see paragraph 8.6.2).
to save in the instrument memory a record of "Smp" type (see
paragraph 9.2) containing the instantaneous values of voltage and
current present on the instrument inputs. This function is disabled
during a recording.
displayed data. All the previous functions remain however available.
17:35:12
V
A
i
MULTITEST2000
Capítulos
Tabla de contenido
