Electrical Connection; Wiring Diagram - Anselmo Cola SPRINT MAOLICA Manual De Instalación, Uso Y Mantenimiento

2.7 Electrical connection

Connect one end of the power cable to the rear socket of the stove,
and the other to the wall socket.
The voltage supplied by the system must match that specified on the
stove dataplate and in the technical data section of this manual. Plug
the device power cord must be connected only AFTER the end of the
installation and assembly of the device and must remain accessible.
During stove idle periods it is advisable to remove the power cable.
- Make sure the electrical system complies with the regulations,
and has an earth and differential switch in conformity with the
current Standards.
- The power cable must never touch the exhaust pipe and
the hot parts of the stove.

2.8 Wiring diagram

AIR FLOW METER
INPUTS
NTC
probe
room
probe
suppl.
thermostat
fume
probe
AUGER
2.9 Emergency
Suitable fire-prevention devices should be arranged for any eventuality.
In case of a fire, proceed as follows:
- Immediately disconnect the plug.
- Extinguish the fire using suitable fire-extinguishers.
- Call the fire department immediately.
- Do not use jets of waters to extinguish the fire.
PLC additional
accessories and console
IGNITER
EXCHANGER 2
EXCHANGER 1
Fume verifier encoder
EARTH
EXCHANGER 3
SYSTEM
ALF = main safety thermostat
ALC = low pressure gauge
FUME EXTRACTION
FAN
49 SPRINT ** maiolica