Nice MOU Instrucciones Para El Uso página 20

Software BUPC3
Operating manual
6.1) Introduction [
The "BUPC" software version 3 is a program for PC that makes it possible to use the BUPC and MOU programming
units as interface terminals between the PC and the memory cards of the "Bio" and "FloR" systems (BUPC) or
"Mom" and "Mot" systems (MOU) on which the "authorised" codes are stored. The PC can be used to work on the
codes with the utmost ease on a global level (filing, copying, list printouts) or on individual codes (delete, add, or clone
code on a transmitter or Card), to the point of being able to link each code with the name of the owner and a descrip-
tive text. The BUPC3 application is compatible with all versions of the BUPC and MOU programming units and it
adapts automatically to the version of the codes present.
The use of this application calls for only basic IT skills on the part of the operator, with a specific knowledge of the
Windows® operating system.
6.2) BUPC3 program user license
The BUPC3 program is protected by laws governing copyright and intellectual property rights; it is not sold but rather
licensed for non-exclusive use. Nice S.p.a. remains the sole proprietor of this copy of the program.
The BUPC3 program is licensed as a product in conjunction with the BUPC and MOU programming units. Separate
use of the program or use on more than one PC are not permitted.
This program and its files are supplied "as is" without any form of warranty concerning the results obtainable through
their use, accuracy, safety, or any other aspects.
Nice S.p.a. cannot be held liable for direct or indirect damages, including loss of earnings, suspension of work, and
similar events, deriving from the use of or impossibility to use the software.
6.3) System requirements [
For this program to operate correctly the user must have a PC of any make and model with the following minimum
specifications:
Operating system:
Microprocessor:
RAM:
Video card:
Optical drive:
Available free hard disk space:
Mouse:
Serial port:
Parallel port:
6.4) Connection of the BUPC programming unit to a PC [
To use this program you will need to connect BUPC or MOU to the PC by means of the supplied 9-core RS232 link
cable. To avoid the risk of damage, the cable should be connected with both PC and programming unit switched off.
20
] [ ] [ ] [ ]
B F C T
] [ ] [
B F
Windows 95/98/ME/NT/2000/XP.
Pentium or higher
64Mb
800x600 with 256 colours
CD-ROM (required for installation)
20Mb
Any type
RS 232 standard interface (9-pin connector)
For printer (optional)
] [ ]
C T
] [
B F
] [ ] [ ]
C T