Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
Original Operating Manual
Contents:
1
Scroll Saw DS 460:..................................................................6
2
General safety instructions ......................................................6
3
Additional Safety Instructions for Scroll Saws .........................7
3.1
Grounding instructions.............................................................8
4
Legend (Fig. 1) ........................................................................8
5
Description of the Machine (see also fig. 1a and 1b)...............8
6
Technical Data: ........................................................................9
7
Installation and Commissioning of the Saw .............................9
7.1
Unpacking (Fig. 2a and 2b): ....................................................9
7.2
Installing the Saw.....................................................................9
7.3
Adjusting the Angle Display (Fig. 3):........................................9
7.4
Assembling the Air Nozzle (Fig. 4):..........................................9
7.5
Connecting the Vacuum Cleaner (Fig. 5):..............................10
7.6
Saw Blades............................................................................10
7.6.1
Clamping and Changing the Saw Blade ................................10
(Fig. 6) ...................................................................................10
(Fig. 7a and 7b): ....................................................................10
7.6.2
Saw Blades with Pin Ends (Fig. 8):........................................10
7.6.3
Fine Setting of the Correct Saw Tension (Fig. 9): ..................10
8
Working with the Saw: ........................................................... 11
8.1.1
Choice of Saw Blade ............................................................. 11
8.1.2
Selecting the Speed:.............................................................. 11
8.1.3
Possible Causes of Broken Saw Blades:............................... 11
8.2
Sawing ................................................................................... 11
8.3
(Fig. 10) ................................................................................. 11
8.3.1
Inside Cuts (Fig. 11)...............................................................12
8.3.2
Mitre Cuts (Fig. 2b) ................................................................12
8.3.2.1 Setting the Mitre Angle...........................................................12
8.3.2.2 Fine Setting (Fig. 2b) .............................................................12
9
Maintenance and Repairs......................................................12
10
Cleaning and Care:................................................................12
11
Spare Parts List .....................................................................30
12
Exploded Drawing..................................................................31
1
Scroll Saw DS 460:
Dear customer!
The use of these instructions
-
makes it easier to become acquainted with the device,
-
prevents malfunctions due to improper handling, and
-
increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge of it and comply with the
instructions.
PROXXON will not be liable for the safe function of the device for:
-
handling that does not comply with the usual intended use,
-
other application uses that are not stated in the instructions,
-
disregard of the safety regulations,
You will not have any warranty claims for:
-
operating errors,
-
lack of maintenance.
For your safety, please comply with the safety regulations without fail.
Only use original PROXXON spare parts.
All rights reserved for further developments in the course of technical
progress. We wish you much success with the device.
6
Safety guidelines and definitions:
It is important that you have read and understood the manual. It contains
information and safety regulations, which allow you to avoid problems
and protect your health. The icons at the bottom allow you to assign
these informations correctly.
This indicates an imminently dangerous
DANGER
situation which, if not avoided, will cause
serious injury or death.
This indicates a potentially dangerous
WARNING
situation which, if not avoided, can cause
serious injury or death.
This indicates a potentially dangerous
CAUTION
situation which, if not avoided, could cause
injury.
Read and understand the entire owners manual
before attempting assembly or operation!
2
General safety instructions
Read and become familiar with this entire instructions manual. Learn the
tool`s applications, limitations and possible hazards.
SAVE THESE INSTRUCTIONS!
1.
KEEP GUARDS IN PLACE and in working order.
2.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of
checking to see that keys and adjusting wrenches are removed
from tool before turning it on.
3.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
4.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power
tools in damp or wet locations, or expose them to rain. Keep work
area well lighted.
5.
KEEP CHILDREN AWAY. All visitors should be kept safe distance
from work area.
6.
MAKE WORKSHOP KID PROOF with padlocks, master switches,
or by removing starter keys.
7.
DON'T FORCE TOOL. It will do the job better and safer at the rate
for which it was designed.
8.
USE RIGHT TOOL. Don't force tool or attachment to do a job for
which it was not designed.
9.
USE PROPER EXTENSION CORD. Make sure your extension cord is
in good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw. An under-
sized cord will cause a drop in line voltage resulting in loss of power
and overheating. Table 1 shows the correct size to use depending on
cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
Exception
No. 1: The reference to the table and the table itself may be omit-
ted if a statement indicating the appropriate gage and length is
incorporated into the instruction.Exception No. 2: The information
regarding extension cords need not be provided for a permanently
connected tool.
10. WEAR PROPER APPAREL. Do not wear loose clothing, gloves,
neckties, rings, bracelets, or other jewelry which may get caught
in moving parts. Non-slip footwear is recommended. Wear protec-
tive hair covering to contain long hair. Exception: The reference to
gloves may be omitted from the instructions for a grinder.
WARNING
Capítulos
Tabla de contenido
