Mettler Toledo IND780 Guia De Instalacion página 16

installed in standard IND780 terminal, and up to six in IND780 Q.iMPACT terminals, with the
following factory numbers (replace y with F):
•
•
•
The High Precision IDNet versions of both enclosure types of the IND780 terminal have received
Zone 2/22 approval from UL and DEMKO. Up to four IDNet option cards can be installed in the
IND780 terminal with the following factory numbers (replace y with 4):
•
•
•
The above listed IND780 terminals and options are suitable for use in CL I GP A-D DIV 2; CL II GP
F,G DIV 2; CL III; CL I ZONE 2 GP IIC locations when installed per METTLER TOLEDO drawing
64069877. Note that not all IND780 Options are approved for all areas. The panel-mount versions
must be installed in a nationally recognized test laboratory approved, dust-tight enclosure
appropriate for the environment. All approved versions must be installed per METTLER TOLEDO
control drawing 64069877.
The PDX versions of both enclosure types of the IND780 terminal have received Division 2 and
Zone 2/22 approval from UL and DEMKO. One PDX option card can be installed in the IND780
terminal in slot 1 or 2 with the following factory numbers (replace one y with 6):
•
•
•
The above listed IND780 terminals with the PDX option are suitable for use in CL I GP C,D DIV 2; CL
II GP F,G DIV 2; CL III; CL I ZONE 2 GP IIB locations when installed per METTLER TOLEDO drawing
64069877. The panel-mount versions must be installed in a nationally recognized test laboratory
approved, dust-tight enclosure appropriate for the environment. All approved versions must be
installed per METTLER TOLEDO control drawing 64069877.
1-4 METTLER TOLEDO IND780 Division 2 and Zone 2/22 Installation Guide
78R-yyyyyy-xxx-000 (Color Panel mount enclosure – Flow Meter)
78J-yyyyyy-xxx-Y96 (Color Harsh enclosure – Flow Meter, US/Canada)
78J-yyyyyy-xxx-Z97 (Color Harsh enclosure - Flow Meter, ATEX)
78R-yyyyxx-xxx-000 (Color Panel mount enclosure – IDNet)
78J-yyyyxx-xxx-Y96 (Color Harsh enclosure – IDNet, US/Canada)
78J-yyyyxx-xxx-Z97 (Color Harsh enclosure – IDNet, ATEX)
Note that the METTLER TOLEDO High Precision IDNet bases are not approved for use within an
area rated as Division 2 or Zone 2 in the United States and Canada.
78R-yyxxxx-xxx-000 (Color Panel mount enclosure – PDX)
78J-yyxxxx-xxx-Y96 (Color Harsh enclosure – PDX, US/Canada)
78J-yyxxxx-xxx-Z97 (Color Harsh enclosure – PDX, ATEX)
Note that the METTLER TOLEDO PDX is only approved for use within an area rated as CL I GP
C,D DIV 2; CL II GP F,G Div 2; CL III; and CL I ZONE 2 GP IIB in the United States and Canada.
THE INTERNAL #64064718 PDX
AN IND780 TERMINAL INSTALLED IN AN AREA CLASSIFIED AS CL I GP A,B DIVISION 2 OR
CL I ZONE 2 GP IIC IN THE UNITED STATES and CANADA. FAILURE TO COMPLY WITH THIS
WARNING COULD RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
WARNING
®
OPTION (KIT NUMBER 64067252) MUST NOT BE USED IN
64063214 | 07 | 02/2018