Wiring Connection - mabe MMI12CABWCAAXM8 Manual Del Propietário

nota:
Esta tabla solamente es para referencia solamente.
Válvula de paro

wiring connection

1. Loosen the screws and remove E-parts cover from the unit.
2. Connect the cables respectively to the corresponding terminals
of the terminal board of the outdoor unit (see the wiring diagram),
and if there are signals connected to the plug, just conduct butt joint.
3.
Ground wire: Remove the grounding screw out of the electric bracket,
cover the grounding wire end onto the grounding screw and screw it
into the grounding hole.
4.
Fix the cable reliably with fasteners (Pressing board).
5.
Put the E-parts cover back in its original place and fasten it with
screws.
tuerca Tubería de conexión
Tubería de líquidos
Tubería de gases
Llave
E-parts cover
65