Buttons Description - mabe MMI12CABWCAAXM8 Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

cooling. The A/C runs under heating mode(the cooling only A/C only runs
under fan mode), the internal fan runs for three minutes with weak wind
before stop. The purpose of this function is to dry the inside of the evapora-
tor and to prevent the evaporator from going mouldy due to water
deposition and thus dispersing strange smell.
note:
1.
This function has not been set in the factory. You may freely set and
cancel this function. The setting method is: under off status of the A/C
and the remote controller, point the remote controller toward the A/C
and continuously press "fungus proof" pushbutton for one time, the
buzzer keep beeping five times again after five times beep, indicating
that this function is ready. In case this function has been set, unless the
whole A/C is powered off or the function is manually cancelled, the A/C
then has this function as default;
2.
To cancel the function: 1. Power off the whole A/C; 2. Under off status of
the A/C and the remote controller, point the remote controller toward
the A/C and continuously press "fungus proof" pushbutton for one
time, the buzzer keep beeping three times again after five times beep,
indicating that this function has been cancelled;
3.
When this function is on, it is suggested not to restart the A/C before it is
completely stop;
4.
This function will not run in case of time stop or sleep
stop.

buttons description

LCD display instruction
6
1.
On/off
2.
Running mode
3.
Speed
4.
Feeling
on/off display: When the remote controller is on the state, the LCD will
be display or not.
digital display: Under the state of normal working, it displays setting
temperature. While the feeling function is start, it will display room
temperature, and under the state of timer mode, it will display setting
timer.
1
7
8
SET
ROOM
TIMER ON OFF
4
5
5.
Timer
6.
Running mode
7.
Transmit
8.
Digital
2
3
49

Hide quick links:

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido