Wrap The Piping; Wiring Diagram - mabe MMI12CABWCAAXM8 Manual Del Propietário

62

wrap the piping

1.
Use the insulation sleeve to wrap the joint part the indoor unit and
the connection pipe, and then use insulating material to pack and seal
insulation pipe, to prevent generation of condensate water on
the joint part.
2.
Connect the water outlet with drain pipes, and make the connection
pipe, cables, and the drain hose straight.
3. Use plastic cable ties to wrap the connecting pipes, cables and drain
hose. Run the pipe sloping downward.
1.
Hang the indoor unit on the peg board, and move the unit from left to
right to ensure that the hook is properly positioned in the peg board.
2.
Push toward the lower left side and the upper right side of the unit
toward the peg board, until the hook is embedded in the slot and
makes a "click" sound.

wiring diagram

If your air conditioner is provided with power cable, the wiring of the
indoor unit is connected in the factory, there is no need of connection.
If the power cable is not provided, connection is needed in
accordance with the wiring diagram.
Connecting Pipe
Drain Hose and Cables
Plastic Strap