Mounting Plate; Wall-Through Hole - mabe MMI12CABWCAAXM8 Manual Del Propietário

60

mounting plate

1.
to prevent vibration.
2. Use the "+" type screw to fasten the peg board, horizontally mount
the peg board on the wall, and ensure the lateral horizontal and
longitudinal vertical.
3.
is solid.

wall-through hole

1. Make a hole with an electric hammer or a water drill at the predeter-
mined position on the wall for piping, which shall slant outwardly by
5°-10°.
2.
To protect the piping and the cables from being damaged running
through the wall, and from the rodents that may inhabit in
the hollow wall, a pipe protecting ring shall be installed and sealed
with putty.
note:
Usually, the wall hole is Φ60mm~Φ80mm. Avoid pre-buried power wire
and hard wall when making the hole.
Pipe protection ring
Putty