3.
strong button
Only under the state of cooling or heating mode, press this button,
the fan speed is adjusted to strong auto-maticlly and the LCD
displays "high fan", the "strong" function is started to reach the
highest cooling or heating.
4.
my temp button
When it displays "my temp" button: Press this button can be used to
set the my temp function.
The LCD shows the actual room temperature when the function set
and it shows the setting temperature when the function cancelled.
This function is invalid when the appliance at the Fan mode.
health button
5.
You can start or stop "health" function by pressing this button.
According to environment temperature, the air conditioner can run
intelligently, and choose speed auto-maticly. It can create a comfortable
surroundings auto-maticly to get the most suitable temperature for
body.
6.
timer button
setting the "ON" timer time:
a.
When remote controller is at off state, press "timer" button, the LCD
displays "timer on" and the timer time, the range of setting time is
0.5h to 24h.
b.
You can press the " " or" "button to adjust the timer time, each
touch will be set time to increase or reduce 0.5h before 10 hours ago,
after ten hours will be set time to increase or reduce 1h per pressing,
to enables your required timer.
c.
Press "timer"button again, to set the timer on function.
d.
You can set another function to insure the suitable state after air
conditioner turn on (including mode, temperature, swing, fan speed
and etc). The LCD will displays all your setting and keep it, when the
timer reach to the set time, the air conditioner will be working
according to your set automatically.
setting the "OFF" timer time:
When remote controller is at on state, press "timer" button, the LCD
a.
displays "timer off" and the timer time, the range of setting time is
0.5h to 24h.
You can press the " " or " "button to adjust the timer time, each
b.
touch will be set time to increase or reduce 0.5h before 10 hours ago,
after ten hours will be set time to increase or reduce 1h per pressing,
to enable your required timer.
Press "timer" button again, to set the timer off function.
c.
7.
screen button
You can let the LCD display working or not by pressing this button.
8.
" " or " "
Press the "+"or "-"button, you can set the temperature range from 16 to
32 , Display will change when you touch the button.
47