Bulb Replacement - Honda XRE300 Manual Del Propietário

XRE300 · XRE300A

Bulb Replacement

(Refer to the Safety Precautions on page 53.)
The light bulb becomes very hot while the light is ON,
and remains hot for a while after it is turned OFF.
Be sure to let it cool down before servicing.
Do not put finger prints on the headlight bulb, as
they may create hot spots on the bulb and cause it
to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands, clean
it with a cloth moistened with alcohol to prevent its
early failure.
Be sure to turn the ignition switch OFF when

replacing the bulb.
Do not use bulbs other than those specified.

After installing a new bulb, check that the light

operates properly.
Headlight Bulb
1. Remove the instrument panel cover (page 42).
2. Pull out the socket (1) without turning.
3. Remove the seat rubber (2).
(2)
(1)
83
(1) Socket
(2) Seat rubber
(Cont.)