Packaging; Storage; Maintenance / Cleaning; Repair - Kollmorgen AKM Serie Manual Del Producto

Kollmorgen
14.2

Packaging

l
l
14.3

Storage

l
l
l
l
l
l
14.4

Maintenance / Cleaning

l
l
l
l
l
14.5

Repair

Repair of the motor must be done by the manufacturer. Opening the motor invalidates the
warranty. Send the motor to:
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
14.6

Disposal

In accordance to the WEEE-2002/96/EG-Guidelines we take old devices and accessories
back for professional disposal, if the transport costs are taken over by the sender. Send
the devices to:
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
Servomotors AKM
08/2012
Cardboard packing with Instapak
You can return the plastic portion to the supplier (see "Disposal").
Motor type Packing
AKM1 Cardboard
AKM2 Cardboard
AKM3 Cardboard
AKM4 Cardboard
Climate category
Storage temperature
Humidity
Store only in the manufacturer's original recyclable packaging
Max. stacking height
Storage time
Maintenance and cleaning only by qualified personnel
The ball bearings should be replaced after 20,000 hours of operation under rated
conditions (by the manufacturer).
Check the motor for bearing noise every 2500 operating hours, respectively each
year. If any noises are heard, stop the operation of the motor, the bearings must be
replaced (by the manufacturer).
Opening the motor invalidates the warranty.
If the housing is dirty, clean housing with Isopropanol or similar, do not immerse
or spray
®
foam cushion.
Max. sta-
Motor type
cking height
10 AKM5
10 AKM6
6 AKM7
6 AKM8
1K4 to EN61800-2
- 25...+55°C, max. variation 20K/hr.
rel. humidity 5% - 95%, no condensation
see table in chapter "Packaging"
unlimited
Handling
Max. sta-
Packing
cking height
Cardboard 5
Cardboard 1
Cardboard 1
Pallet 1
English - 37