Combined Application - SKYLOTEC MILAN AGR 2001 Instrucciones De Uso

GB

4.4 COMBINED APPLICATION

A person who has fallen is stuck in a fall ar-rester, a guided type fall arrester or a lan-yard.
First the device is fixed to the anchor point as described before. The rope is lead through the device
in such a manner that the descending rope is running out of the right side opening (view from the
hand wheel side). Attach the person who needs to be rescued to the descending rope. Depending on
the circumstances the person may not be reachable directly due to a fall over a roof edge or plat-
form, the person is hanging free. In such a case, a suitable rope clamp or rescue loop (G) must be
attached to the arrest lanyard by connecting it with the MILAN.
After all connecting elements have been closed securely and checked,
the person suffered from a fall is lifted. (Ensure that the rope is
pro-tected.) The person is lifted until the Fall arrest lanyard (the fall
arrester, the guided type fall arrester, etc.) is slack (H). Now you in-
sert the upstream rope into the rope guide and the fixing clamp of the
device (F).
Now the person is disconnected from the fall arrest lanyard and the rope taken out of the fixing
clamp. The descending can begin.
In case the person suffering from a fall is unconscious it is suggested that the assisting person
is descending together with the injured person – this allows avoiding contact with constructions
during the operation.
12
MAT-BA-0068-03_20200129_in_Bearbeitung.indd 12 MAT-BA-0068-03_20200129_in_Bearbeitung.indd 12
Do not grab onto a rotating handwheel!
Never abseil with the Rescue Device Driver mounted
G H
F
29.01.2020 15:23:51 29.01.2020 15:23:51