Induction
plate
Ø (mm)
Level
0
1
2
3
4
5
6
7
8
9
P
Safety functions and error display.
ERROR CODE
r
u
H
c
C
FA
FC
FE
FT
Fc
FH
FJ
FO
FL
FU
1
2
3
210
145
210
Power (W)
0
0
0
100
75
100
200
150
200
300
300
300
500
400
500
700
500
700
900
600
900
1100
800
1100
1300
1000
1300
1500
1200
1500
2000
1600
2000
ERROR DESCRIPTION
See "Power management for a limited
power cooking hob (ECO)" pag.28
1) See "Pan sensor" pag.24-25
2) Overvoltage disturbance
See "Displaying power levels" pag.27
Induction generator overtemperature
Induction heater overtemperature
Anomaly of infrared signal, of on/off key -
all cooking zones are deactivated
Receiver infrared anomaly of button
on/off - all cooking zones are deactivated
Touch control ntc sensor: short circuit on
ntc sensor.- all cooking zones are
deactivated
Touch control ntc sensor: ntc sensor
opening - all cooking zones are
deactivated
Touch control ntc sensor: ntc sensor
overheating - all cooking zones are
deactivated
Eprom (memory) of Touch control:
anomaly of touch control eprom. - All
cooking zones are deactivated
Anomaly of adc, of on/off key - all
cooking zones are deactivated
Touch Control Sotware: anomaly on the
touch control software. - All cooking
zones are deactivated
Touch Control luminosity: excessive
external luminosity that hampers t/c
sensors (push buttons) calibration - All
cooking zones are deactivated
Touch Control Divider: anomaly on the
t/c Divider. - All cooking zones are
deactivated
4
145
0
75
150
300
400
500
600
800
1000
1200
1600
Contact authorized center for technical
assistance - specifying the error code
Switch the hob off and the oven installed
underneat it until they cool down
completely. Turn on the hob to check all
functions. If the problem remains Contact
authorized center for technical assistance -
specify the error code
Switch the hob off and the oven installed
underneat it until they cool down
completely. Turn on the hob to check all
functions. If the problem remains Contact
authorized center for technical assistance -
specify the error code
Contact authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Switch the hob off and in case also the
underbuilt-in ofen since completely
cooling. Turn on the hob to check all
functions. If the problem remains contact
authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Contact authorized center for technical
assistance - specifying the error code
Remove or replace the external
luminosity source. If the problem remains
despite the calibration conditions have
been respected : contact authorized
center for technical assistance -
specifying the error code
Contact authorized center for technical
assistance - specifying the error code
INSTRUCTION MANUAL
28