Foster S4000 Manual De Instrucciones página 25

Ocultar thumbs Ver también para S4000:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Switching a heater off
manually
General off
Pan sensor
Booster function
Key lock
Pressing the heater keys (+ and -) at the same time switches off the
corresponding heater and the display shows the power level as 0. We can also
switch off the heater by pressing the key (-) until the display shows the power
level as 0.
The general off function can be performed regardless of the operating mode of the
cook top by pressing the on/off sensor (F).
When the cook top is turned off, a beep sounds and the displays turn off, as long
as an 'H' is not being shown on the corresponding display as a result of residual
heat or an alarm.
Each burner is complete with its own sensor for detecting the presence of a pan.
The system is fine-adjusted to recognize the presence of a pan that, according
to the scale of the EN standards, is one size smaller than the nominal diameter
of the burner. If the hotplate fails to detect any pan or detects an aluminium pan,
power level flashes on its display. After 60 seconds power level backs to 0.
If power level flashes on the display when a pan is actually on the hotplate,
this generally means that the size or shape of the pan concerned is
unsuitable. In this case, check whether the type of pan is suitable for
induction cooking (see the pan manufacturer's trademark or instructions).
Activating the Booster function
This function can be activated if the touch control is on. It takes the cooking level
to the maximum power for 10 minutes and then returns to level 9.
The display shows the function has been activated by the letter 'P'.
After setting the cooking zone to level 9, just press the key (+) and the booster is
activated, the power display shows a 'P'.
Cancelling the Booster function
The Booster function can be cancelled automatically after the preset period of 10
minutes, or before this time if the user wishes.
When a burner is running at "P" (booster) level and:
▪ Booster is deactivated by pressing key (-), its power is reduced to level 9.
Holding the key lock sensor (G) down turns the key lock function on or off. If the
pilot light associated with the key lock sensor is on, the keypad is locked.
The locking function can be activated when the cooking levels are activated or
when the cook top is off. If the cook top is on, the key lock function locks all the
sensors except the general on/off sensor and the key lock. When the cook top is
off, the key lock function locks all the sensors and the general on/off (F).
If the cooktop is turned off while the "key lock" is active, this will be still active at
the next turning on.
When the cooktop is connected to the power supply, the "key lock" is
active.
Unlocking the keypad
If the keypad is locked, the pilot light associated with the key lock sensor is on,
holding down the key lock sensor (G) turns the key lock function off and the pilot
light goes off.
25
Tabla de contenido
loading

Tabla de contenido