English
You should regularly carry out cleaning and maintenance of the cleanable water tub as described
in this section.
Disassembling the H5i
Refer to illustration A.
1.
Slide the latch.
Lift open the flip lid.
2.
3.
Remove the water tub.
4.
Discard any excess water from the water tub.
Unclip all four side latches.
5.
6.
Pull apart the tub lid, plate and base.
Daily cleaning
1.
Wash the disassembled tub lid, plate and base in warm water using a mild detergent.
2.
Rinse thoroughly in clean water and allow them to dry away from direct sunlight.
Note: The disassembled tub lid, plate and base may also be washed in a dishwasher on the
delicate or glassware cycle (top shelf only).
Monthly cleaning
1.
Peel the flip lid seal from the flip lid and wash it in warm water using a mild detergent.
2.
Wipe the exterior of the H5i with a damp cloth and mild detergent.
Reassembling the H5i
Refer to illustration B.
Place the plate back onto the base.
1.
2.
Place the tub lid back onto the plate/base ensuring that the centre holes are aligned.
3.
Clip all four side latches.
4.
Fill the water tub and return the water tub to the H5i.
Close the flip lid ensuring that it clicks into place.
5.
Maintenance checklist
Inspect the water tub and flip lid seal for wear and deterioration.
9
Replace the water tub if any component is leaking or has become cracked, cloudy or pitted.
9
2