Technical Specifications - TRAPP Master 1000 Manual De Instrucciones

www.trapp.com.br
Additional Safety and Operation Instructions
Before turning on the equipment, make sure the
 
voltage of the power source (110/127 or 220/230
V) is the same of the equipment.
Read the instructions carefully and familiarise
 
yourself with the controls and how to use the
equipment correctly.
Remember that the operator or user is responsible
 
for any accident or damage involving other
people and/or their property.
Don't operate the equipment when you're
 
wearing sandals or barefoot.
When you're using the equipment always wear
 
trousers and proper footwear.
Avoid operating the equipment in damp
 
environments and never use it in the rain.
Walk, don't run when you're using the
 
equipment.
Be careful where you step when working in hilly
 
areas - hillsides and mounds.
Always use the equipment in broad daylight or
 
good artificial light.
Motor Type Tension
Single 110/127 V
Universal
phase 220/230 V
Extension Cord Right-use Table
Meters 10 m
Voltage
Gauge (Ø) A.W.G.
Gauge (Ø) mm
Voltage
Gauge (Ø) A.W.G.
Gauge (Ø) mm

Technical Specifications

Maximum Approx. Sound
Power Rotation
1200 W 9000 rpm 87 dB (A)
20 m 30 m
18 16 14
0.75 1.0 1.5
18 18 16
0.75 0.75 1.0
Turn off the equipment whenever you have to
 
cover ground and to go around obstacles. If
the equipment starts vibrating, unplug the cord
immediately. Check as soon as possible why it's
vibrating - that's a sure sign that it needs to be
adjusted or repaired.
Check regularly if all bolts are tight.
 
Before using the equipment, check if the blade
 
and the nylon filament spool are in place. Do a
visual inspection of the cutting blade to see that
it's not damaged or blunt. Replace the blade and
damaged or worn bolts to ensure balance.
Check the cord and never use insulating tape to
 
repair it.
Never hose down your equipment to clean it -
 
use a damp cloth and neutral washing product.
Warning!
Whenver you are cleaning or servicing
 
your equipment, always make sure
that it's turned off, that the blade isn't
running and unplug the cord.
Never use a dual-end blade.
 
Weight Length
Level
5,8 kg 1,80 m
40 m 50 m 60 m
110 / 127 Volts
14 14
1.5 1.5
220 / 230 Volts
16 16
1.0 1.0
Cutting diameter
Width Height
(at skirt) (at skirt)
Blade
29 cm 16 cm 26 cm
70 m 80 m
12 12 12
2.5 2.5 2.5
14 14 14
1.5 1.5 1.5
Spool
35 cm
90 m
12
2.5
14
1.5
19