TRAPP Master 1000 Manual De Instrucciones página 22

Before connecting, always check if the mower's
tension is the same as the power supply.
Put the mower on the ground, fold the
 
extension cord (1) at the female-plug end, with
enough slack to connect it to the maleplug on
the motor's outlet (2).
Hook the extension cord's fold to the lock (3),
 
as seen in the picture and only then connect
the male-plug to the power source.
Switch 2
Figure 3
22
Using the Supporting Belt
Where to Connect
Switch
Switch 1
When the mower fits well with the supporting
belt, it makes the job considerably easier. A
good fit will help you avoid sore arms and back
pain.
You can adjust the equipment to your own
needs with your arms slightly curved.
How high you'll hold the mower will depend on
what kind of terrain you'll have to cope with.
The more difficult the environment - many
stones and branches - the higher it should be.
To increase operator safety TRAPP incorporated
a double actuator "on/off" switch to Master
1000 mower. It operates as follows (figure 3):
To turn the mower on simply press the switch 1
 
and switch 2 together.
Warning!
The mower will turn off by releasing one
 
of the switches.
www.trapp.com.br