TRAPP Master 1000 Manual De Instrucciones página 25

www.trapp.com.br
Recharging the spool is a quick and easy
procedure. Use only 2.4 mm gauge nylon
filament. Out of specification nylon filaments can
damage the motor, the spool running system and
consequently you'll loose the warranty.
1. Loosen the spool-mounting butterfly.
2. Remove the spool.
3. Put the nylon filament in the spool case winding
it clockwise.
How to Recharge the Spool
4. When you have finished winding the nylon
filament, run it through the mounting grooving to
keep it from unwinding.
5. Assemble the spool back again, running the
nylon filament through the side holes.
6. Use the butterfly to mount the spool on the
equipment.
25