Supply Condition; Packing, Handling, Receiving, Storage; Packing; Handling - brevini ED2090MR20FL350B3 Manual De Instalación Y Mantenimiento

3. SUPPLY CONDITION:

The exterior of the gear units are painted with a synthetic epoxy
primer ("RAL 5021" water blue), unless otherwise indicated in
the contracts. Such protection can withstand normal industrial
environments, including outdoor sites, while additional synthetic
top coats can also be applied. If the machine will be used under
particularly aggressive environmental conditions, special types
of paints can also be applied.
The machined external parts of the gear unit, such as the ends
of the hollow and non-hollow shafts, support surfaces, spigots,
etc. are protected with rust-inhibitor oil (tectyl). The internal parts
of the gear unit casings and drives are also protected with rust-
inhibitor oil.
All the gear units, unless otherwise indicated in the contracts,
are supplied without lubrication (as indicated by a special
adhesive sticker attached to the gear unit to notify the user
of such a supply condition).

4. PACKING, HANDLING, RECEIVING, STORAGE:

4.1 Packing

BREVINI POWER TRANSMISSION S.p.A. products are
packed and shipped in crates or on pallets, depending on the
specific case.
- All Brevini products, unless otherwise indicated in the contracts,
are packed with wrapping that can withstand normal
industrial environments.

4.2 Handling

Note: the weight shown on the nameplate does not include any
accessories: such as brakes, motor flanges, wheel flanges, etc.;
consequently, to obtain the gear unit + accessories total weight,
please add, depending on the gear unit size, a max approximate
extra weight of 40 kg. for input accessories; for output
accessories, please calculate a max value equal to approx. the
8% of the gear unit weight depending on the unit size.
28
To move packages, use lifting equipment that is suitable for the
type of packing and for which the capacity is indicated on such
equipment.
Do not tilt or turn the package upside down while lifting or during
transport.
If the packages are unloaded from a fork-lift truck, make
sure the weight is balanced on the forks.
If necessary, place wooden wedges under the package to make
lifting easier.