Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
Maintenance is essential to extend the life of any
farming equipment, to improve performance
and provide greater safety. The operation times
indicated in this manual are to be used as a
reference for normal usage conditions. They can
vary according to the type of service, environment,
seasonal factors etc.
Maintenance schedule
Every 10 working hours
At the end of every working day, clean the machine
so that its parts are always in good working
conditions.
Lubricate cardan crosshead.
Check for hydraulic oil leak and for damaged parts.
Make sure blades are in good condition, sharp and
properly secured.
The only lubrication points are the bearings (1) and
(2) and the wheels for transporting the machine (3).
Lubrication should be done daily through grease
fitting (A), (B) and (C). Use bearing grease.
Relubrication: weekly with approx. 10 grams.
Recommended grease type: TEXACO
MARFAK
GREASE,
IPIRANGA GREASE or GRAXAZUL of
FAG.
1
A
Maintenance
Lubrication
LITOLINE
MP
Every 25 working hours
Lubricate rotor bearings through grease fittings.
Lubricate transmission shaft bearings through grease
fittings.
Every 50 working hours
Check whether belts are properly stretched.
Check whether all screws and nuts are properly
tightened.
Maintenance and servicing
Before servicing the machine, stop
the motor, disconnect from TDP, use
parking brakes and place equipment
horizontally on the ground.
Before injecting lubricant through
grease fittings, clean them to prevent
dust and weird objects from getting
mixed with the grease, decreasing the
lubrication effect.
2
C
Wheel lubrication point.
B
3
75
Tabla de contenido
