Personal Safety - TRAPP TR 500 Manual De Instrucciones

3 - Personal safety

Beware with what is going on and use common

sense when operating the equipment. Do not use it
when you are tired, distracted or under the influence
of drugs, alcohol or medicine. A slight distraction
may result in a serious injury.
Use safety equipment. Always use safety glasses.

Using safety equipment such as gloves, shoes,
earmuff, you increase your safety and reduce the risk
of accidents.
Dress properly. Do not wear loose clothes or

jewerly as they may be caught by movable parts of
the equipment. We recommend the use of gloves,
footwear, earmuff and safety glasses.
Take precautions against accidental running. Make

sure the switch is set to "off" before plugging the
equipment in. Failure to do so may cause a serious
accident.
Remove all objects before turning on the

equipment. A tool or any other object stuck in the
movable parts of the equipment may result in an
injury.
4 - Use and care
Do not overuse the equipment. Use it in the right

way and for the purposes described in this manual
for better performance and safety while working.
Do not use the equipment if the switch does not

turn on/off. The equipment can not be controlled
if the on/off switch is damaged. A defective switch
shall be immediately repaired.
Switch off the circuit breaker, remove the fuses or

unplug the equipment before servicing, substituting
the cutting blades and accessories. These safety
preventive measures reduce the risk of accidental
operation of the equipment.
58
Do not allow people that are not familiarized

with the equipment to use it. The equipment may
become dangerous in the hands of people not
familiar with its operation.
Preserve your equipment. Frequently check if

the movable parts are fixed, if any component is
damaged or check for any other condition that may
affect its optimum operation. Shall any problem
arise, fix it before using the equipment. Many
accidents are caused by lack of proper maintenance.
Keep the cutting blade sharp and clean.

The cutting blade keeps moving after the equipment

is switched off. Therefore be aware of that when
servicing.
Use the equipment and accessories according to the

instructions in this manual. Take in consideration
the working conditions and the service to be done.
Using the equipment for operations not covered in
this manual may result in dangerous situations.
Do not grind rock, glass, metals, plastics, chemical

products or other items that can damage the
shredder mill. In case of any product that is not
recommended to be shredded, one should contact
the factory.
Note:
According to the Brazilian standard NBR
5410, it is compulsory to install a device to protect
against residual differential current (DR device) in
the electrical installation of your residence. The
function of the "DR" is to protect the user against
serious electrical shock risk (consult an electrician).
5 - Service
Call qualified professionals to service the

equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts that
are not original.
www.trapp.com.br