Electrical Installation; Electrical Risk - TRAPP TR 500 Manual De Instrucciones

Trituradora de residuos orgánicos
Ocultar thumbs Ver también para TR 500:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

www.trapp.com.br
Noise
Noise measurement is made according to noise

technical standards applicable to the work place and
according to the following parameters:
Measurement at the front of the machine, 1.6

m height, and at 1.0 m from central opening.
The following levels of noise were obtained:

Neutral: 94 dB (A)

Full load: 104 dB (A)

Note: approximate.
Attention!
Wear ear protection when using our
shredder.

Electrical installation

The work in the electrical part must be executed by

qualified professionals.
Mechanical risk
All movable parts (e.g. disk, hammers, belts) that

offer continuous danger shall be removed with safe
tools.

Electrical risk

All parts of the machine that are connected to

electrical current shall be insulated and serviced with
adequate tools.
Turning off the gasoline motor
To turn the machine off in an emergency situation,

turn off the motor power switch. To turn off in a
normal working situation, close the fuel valve and
wait until the motor turns off due to lack of gasoline,
then turn the power switch off.
79
Tabla de contenido
loading

Este manual también es adecuado para:

Tr 500eTr 500gTr 500t

Tabla de contenido