Other Functions; Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer DEH-6150BT Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Section
11

Other Functions

Using the AUX source

You can connect an auxiliary device to this
unit using a stereo mini plug cable.
% Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to What's what on page
8.

Selecting AUX as the source

% Press SRC/OFF to select AUX as the
source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting on page 41.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1
After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2
Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to En-
tering disc titles on page 18.
Turning the clock display
on or off
You can turn the clock display on or off.
! Even when the sources are off, the clock
display appears on the display.
% Press CLOCK/DISP OFF to turn the clock
display on or off.
Each press of CLOCK/DISP OFF turns the
clock display on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
44
En
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
% Press and hold CLOCK/DISP OFF.
Pressing and holding CLOCK/DISP OFF
switches the display indication and button illu-
mination on or off.
# While the display indication is turned off,
CLOCK/DISP OFF button lights up.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
SMS (Short Message
Service) Reception
Notification Function
When an SMS is received by the connected
cellular phone, a message is displayed for 8
seconds to notify you of the reception. A beep
tone also sounds at that time.
Note
When an SMS is received while a menu screen is
displayed, the display of the menu is
cancelled.

Using the PGM button

You can operate the preprogrammed functions
for each source by using PGM on the remote
control.
% Press PGM to turn pause on when se-
lecting the following sources:
! COMPACT DISC – Built-in CD player
! USB – USB portable audio player/USB
memory
Tabla de contenido
loading

Tabla de contenido