Idiomas disponibles
Idiomas disponibles
Water connection
Have a technician
install the
appliance
and connect
it to the
water
supply
according
to the
enclosed
installation
instructions.
A cold water connection
is required
for operation
of the automatic
ice
maker.
The water pressure must be
between 20 and 100 p.s.i.
(1.4-6.9
bar).
The installation
must comply
with
local plumbing
regulations and local
and state laws.
A separate
shut-off valve must be
installed for the appliance
water
connection.
The shut-off valve for the water
connection
must not be behind the
appliance.
It is recommended
to
place the shut-oft valve directly next
to the appliance
(base unit) or in
another easily accessible
location.
Installing and
connecting
the
appliance
o
Have a technician
install and
connect
the appliance
according
to the enclosed
installation
instructions.
o
After installing the appliance,
wait at least 1/2hour until the
appliance
starts up.
During transportation
the oil in
the compressor
may have
flowed into the refrigeration
system.
o
Before switching
on the
appliance
for the first time, clean
the interior of the appliance
(see "Cleaning the appliance").
o
Always connect
the water
before the power.
o
Apart from statutory
national
regulations,
you should stick to
the connection
terms relating to
the local electricity
and water
companies.
o
Do not removethe
transpor-
tation protection
devices from
the shelves and storage
compartments
until the
appliance
has been installed.
Aligning the appliance
To ensure that the appliance
functions
correctly,
it must be set
level with a spirit level.
If the appliance
is not level, water
may flow out of the ice maker, ice
cubes may be irregular or the doors
may not close properly.
o
Place the appliance
in the
designated
location.
o
Align front feet with a hexagon
wrench.
o
Align rear feet with an Allen key.
Appliances
and installation
dimensions
151/4"
209/32"
i_
_!1........
I
14
3513/16
"
2o
(D
min.11/2-
max.21/8 "
3513/16
"
_. 276/16"
min.24"
A
B
Capítulos
