Idiomas disponibles
Idiomas disponibles
Special functions
[timer]
You can use this function
to set
a time cycle of 0-99
minutes and
a signal reminds you, e.g. if food is
to be removed from the
compartment
after a certain time.
A value of 20 minutes
has been
preset at the factory.
Drinks bottles may crack if they
are stored for longer than
20 minutes in the freezer
compartment.
Switching
on the
[timer]
1.
Press the "options"
button until
[timer] is selected with a triangle.
2.
Activate by pressing the "+"
selection
button (function is
framed).
3.
Press the "+" and "-" selection
buttons to set the required time.
(Repeatedly
press the button to
change the time in one minute
intervals. Holding down the
button increases the time
intervals.)
4.
Press the "options"
button to
start the time cycle.
Ending
a function
[timer]
To stop the function, simultaneously
press the "+" and "-" selection
buttons for 3 seconds.
Note
Repeatedly
press the button to
change the time in one minute
intervals. If the button is held down,
the time changes
in 3 minutes
intervals.
[eco]
The [eco] function switches
the
appliance
to energy-saving
mode.
The appliance automatically
sets the
following temperatures:
Refrigerator
compartment:
43 °F (+6 °C)
Freezer compartment:
3 °F (-16 °C)
Switching
on the
[eco]
1.
Press the "options"
button until
[eco] is selected
with a triangle.
2.
Activate by pressing the "+"
selection
button (function is
framed).
Switching
off the [eco]
1.
Press the "options"
button until
[eco] is selected
with a triangle.
2.
Deactivate
by pressing the "-"
selection
button (function is no
longer framed).
[vacation]
If leaving the appliance
for a long
period of time, you can switch the
appliance
over to the energy-saving
holiday mode. The temperature
in
the refrigerator
compartment
is
automatically
switched
over to
57 °F (+14 °C).
Do not store any food in the
refrigerator
compartment
while in
vacation
mode!
Switching
on the
[vacation]
1.
Press the "options"
button until
[vacation]
is selected
with
a triangle.
2.
Activate by pressing the "+"
selection
button (function is
framed).
Switching
off the [vacation]
1.
Select [vacation] function
until
a triangle is displayed.
2.
Switch off by pressing the "-"
selection
button (function is no
longer framed).
[clock]
The time is indicated on the time
display panel. The time can be set
with the [clock] function.
Setting
the time
1.
Press the "options"
button until
[clock] is selected
with
a triangle.
2.
Activate by pressing the "+"
selection
button (function is
framed).
Press the "+" or "-" selection
buttons to set the required time.
Press the "options"
button to
save the setting time.
.
4.
[]
If the [timer] function
is
switched
on, the time is not
displayed.
[IWD off]
You can use this function to switch
off the ice and water dispenser.
Before switching off the ice maker,
it is most important
that you
switch the water supply to the
appliance
off for a few hours.
Empty and clean ice cube container.
Re-attach
the ice cube container.
Ensure that the ice cube container
engages
with the support.
Switching
off [IWD oft]
1.
Press the "options"
button until
the [IWD off] function
is selected
with a triangle.
2.
Activate by pressing the "+"
selection
button (function is
framed).
Switching
on [IWD
oft]
1.
Press the "options"
button until
the [IWD off] function
is selected
with a triangle.
2.
Press the "-" button (function
is
not framed).
[quick ice]
You can use this function to
accelerate
the production
of ice
cubes.
Switching
on and
off
Press the "super/quick
ice" button
(only functions
if the freezer
compartment,
refrigerator
compartment
and "cool-fresh"
drawer displays
have not been
selected
on the display panel).
15
Capítulos
