Identification Of The Machine And Components - Honda HF2315 Manual Del Operador

7 8
7. = Danger of cutting yourself. Cutting means in motion. Do
not put hands or feet near or under the opening of the cutting
means housing.
8 = Warning: Do not manipulate the mi croswitch.
9 = Avoid injury from getting caught in belt: Do not operate the
machine without shields in place. Stay clear of belts.
10
12
10 = Warning: Read the instructions before operating this machine.
11 = Warning: The engine emits toxic carbon monoxide. Do not run
in an enclosed area.
12 = Warning! Petrol is highly flam mable. Stop the engine before
refueling.
13 = Warning: the muffler becomes very hot du-
13
ring operation and remains hot for a while
after stopping the engine.
14 = This is a recyclable product. It contains
14
lead. Do not discard it in the environment
and dispose of in compliance with the laws
in force.
15 16 17
15 = Flammable vapours - Keep away from open flames.
16 = Wear protective goggles.
17 = Keep out of the reach of children.
18 = Corrosive liquid. If the liquid comes into contact with the
eyes, rinse immediately with water and call a physician
19 = Read the instructions for use.
20 = Explosion risk.
9
11
18 19 20
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available
on request. This accessory is to be fitted
as per the instructions provided.
When using, do not exceed the re-
commended drawbar loads stated on the
decal and follow the safety instructions,
( 1.2, C-6).
Total towing weight: On level ground: 200 kg or less
On sloping ground (10°or less): 100 kg or
less
2. IDENTIFICATION OF THE MACHINE
AND COMPONENTS
2.1 IDENTIFICATION OF THE MACHINE
The plate located on the
left side of the main frame
has the essential data of
each machine.
The serial number (5)
must be quoted when you
require technical assist-
ance or spare parts.
1 6
1. Acoustic power level according to
directives 2000/14/EC, 2005/88/EC
2. Conformity mark according to directives
2006/42/EC, 2005/88/EC, 2004/108/EC
3. Year of manufacture
4. Type of machine
5. Serial number
6. Weight in kg (with empty tank)
7. Name and adress of manufacturer are written in the
"EC Declaration of Conformity" CONTENT OUTLINE
included in this Owner's Manual.
8. Engine nominal power (at 2800 rpm).
7 4 5
8 2 3
5 EN