Tools And Accessories; Technical Data - Hilti DG 150 Manual De Instrucciones

● Grinding off projecting objects such as nails and screws etc. is not permissible. Such objects must be removed
carefully before beginning grinding.
Items supplied
1
1
1
1
1
1
1
3. Diamond cup wheels and accessories
Hilti item
Diamond cup wheels
DG-CW 150/6" A1
DG-CW 150/6" B1
DG-CW 150/6" C1
DG-CW 150/6" C10
DG-CW 150/6" C2
DG-CW 150/6" D1
Lamellar seals
Retaining ring
DG 150 toolbox
VCD 50L
Clamping flange for DG150
Clamping nut for DG150

4. Technical data

Nominal voltage
Nominal current
Power input
Power output
Mains frequency
Rated speed at setting no.1
Rated speed at setting no.2
Weight in accordance with EPTA
procedure 01/2003
Printed: 08.07.2013 | Doc-Nr: PUB / 5069653 / 000 / 01
DG 150 grinder
DPC 20 power conditioner
Clamping flange
Clamping nut
Wrench
Protective goggles
Operating instructions
Use/material
Grinding highly abrasive materials such as screed and similar mineral
materials
Grinding to remove coatings with a maximum layer thickness of 3 mm from
concrete and similar mineral materials
Grinding concrete and similar mineral materials of medium hardness and
medium abrasiveness
Grinding concrete
Grinding concrete and similar very hard and highly abrasive mineral materials
Fine finishing of concrete and similar mineral material surfaces
One large lamellar seal and one small lamellar seal
Retaining ring for attaching the large lamellar seal to the dust hood
Carrying case
Dry-type vacuum cleaner
Special quick-stop compatible clamping flange to be used exclusively
for fitting Hilti DG-CW 150/6" diamond cup wheels
Special M13 clamping nut for fitting Hilti DG-CW 150/6"
diamond cup wheels
DG 150 DPC 20
100 V
15 A
1500 W 1760 W 1800 W 2100 W 2100 W 2100 W
1070 W 1260 W 1285 W 1500 W 1500 W 1500 W
50/60 Hz 50/60 Hz 60 Hz
4700 /min
6600 /min
4.1 kg 3.8 kg
110 V 120 V 220 V
16 A 15 A 9.6 A
50/60 Hz 50 Hz
3.8 kg 3.8 kg 3.4 kg
230 V 240 V
9.2 A 8.8 A
50 Hz
3.4 kg 3.4 kg
15