Accessories - Hilti PR 3 Manual De Instrucciones

2 Batteries (size AA cells)
2 Manufacturer's certificates
1 Hilti toolbox
2.13 Operating status indicators
The tool is equipped with the following operating status indicators: auto-leveling LED, inclination angle LED and shock
warning LED.
2.14 LED indicators
All LEDs
Auto-leveling LED (green)
Shock warning LED (orange)
Slope LED (orange)
2.15 Charge status of the Li‑ion battery during operation
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
2.16 Charge status of the Li‑ion battery during charging while inserted in the tool
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
2.17 Charge status of the Li‑ion battery during charging while not inserted in the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn't light, the battery is fully charged.

3 Accessories

Designation
Various tripods
Telescopic staffs
Slope adapter
All LEDs blink
The green LED blinks.
The green LED lights con-
stantly.
The orange LED lights con-
stantly.
The orange LED lights con-
stantly.
LEDs blink
-
-
-
-
LED 1
LEDs blink
-
LED 4
LED 3
LED 2
LED 1
Short designation
PUA 20, PA 921, PUA 30 and
PA 931/2
PA 951/961, PA 962, PUA 50 and
PUA 55/56
PRA 78
The tool has been bumped, knocked off
level or is exhibiting some other error.
The tool is in the leveling phase.
The tool has leveled itself / is operating
normally.
Shock warning mode is deactivated.
Slope mode is active.
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Charge status C
= 100%
75 % ≦ C 100 %
50 % ≦ C75 %
25 % ≦ C 50 %
C < 25 %
Description
en
17