Parameter Summary - Parker AC30 Serie Manual Del Producto

A-30
Modbus TCP

Parameter Summary

The following parameters are relevant to the EtherNet/IP adapter.
Parameter Name
EtherNet IP Enable
EtherNet/IP adapter parameter.
Enables the built-in EtherNet/IP adapter.
EtherNet IP Trip
EtherNet/IP adapter parameter.
Enables the EtherNet/IP trip on loss of connection.
Enumerated values:
0: DISABLED
1: LOSS OF CONNECTION
EtherNet IP State
EtherNet/IP adapter parameter.
Diagnostic indicating the state of the EtherNet/IP adapter.
Enumerated values:
0: SETUP
1: NW_INIT
2: WAITING TO CONNECT
3: CONNECTION IDLE
4: CONNECTION ACTIVE
5: ERROR
8: NONE
EtherNet IP Diag
EtherNet/IP adapter parameter.
Diagnostic indicating if there is a configuration error.
Enumerated Values:
No. Path
3128 Setup::Communications::Base EtherNet IP
Parameters::Base Comms::EtherNet IP Adapter
3129 Setup::Communications::Base EtherNet IP
Parameters::Base Comms::EtherNet IP Adapter
- the trip is disabled
- the inverter will trip on the loss of all Class 1 connections
3130 Monitor::Communications::Base EtherNet IP
Parameters::Base Comms::EtherNet IP Adapter
- EtherNet/IP adapter enabled – the inverter is in the configuration state
- network initialization
- waiting for a Class 1 connection
- Class 1 connection made with scanner in Idle mode
- Class 1 connection made with scanner in Run mode
- configuration error
- EtherNet/IP adapter disabled
3131 Monitor::Communications::Base EtherNet IP
Parameters::Base Comms::EtherNet IP Adapter
Default Range
FALSE FALSE
TRUE
LOSS OF CONNECTION 0: DISABLED
1: LOSS OF CONNECTION
SETUP 0: SETUP
1: NW_INIT
2: WAITING TO CONNECT
3: CONNECTION IDLE
4: CONNECTION ACTIVE
5: ERROR
6, 7: Reserved
8: NONE
NONE 0: NONE
1: INPUT MAPPING FAILED
2: OUTPUT MAPPING FAILED
Writable
CONFIG
CONFIG
NEVER
NEVER
AC30 series Variable Speed Drive