Deleting Old Data; Resetting The Recorder - A&D TM-2430 Manual De Instrucciones

Deleting Old Data

Caution
Steps for deleting old data
Step 1 Press and hold the
to cancel this process, press the
Step 2 Press and hold the

Resetting the Recorder

If the recorder does not work correctly, press the reset key. The recorder
deletes all data and parameters. The internal system is initialized.
Caution
Steps for reset
Step 1 Open the battery cover.
Step 2 Turn off the power switch.
Step 3 Remove the batteries from the recorder.
Step 4 Press the reset key gently.
Step 5 Place new batteries in the recorder.
Step 6 Turn on the power switch. The recorder sounds the
buzzer four times and
Step 7 Set the parameters for the display and clock. Also,
adjust the parameters for automatic measurement.
Initializing the recorder
When the data is to be deleted, confirm that the data has
already been transferred and saved. It is not possible to
recover data that has been deleted.
It is not possible to completely delete data, if the
key is released while the beeper sounds at Step 2.
START STOP
START STOP
All data and parameters are deleted and preset initial pa-
rameters are reset.
Do not press the reset switch too hard. Press this key gently so
as not to damage the components inside.
Keep foreign matter away from the reset switch hole.
is displayed blinking.
E00
Page 19
key until
AUTO ON/OFF key.
key once more until the beeper becomes silent.
START STOP
is displayed. If you want
Reset key
0
0 1
2
1
3
4
2
5
6
7
8
9
O N
O F
F
Deleting Old Data