Selection For The Automatic Measurement - A&D TM-2430 Manual De Instrucciones

Selection for the Automatic Measurement

This setting initializes measurement intervals that is based on the internal 24-
hour clock.
Mode
mode I 07:00 ~ 21:59
22:00 ~ 06:59
mode II The
measurement intervals are changed and the time during sleep can be
distinguished on the data.
When the "S" is off, the measurement is performed every quarter hour.
When the "S" is displayed, the measurement is performed every half
hour.
mode III The measurement interval can change six times within a maximum of 24-
hours. ( The recorder can store six measurement intervals (blocks) in 24-
hours. A block consists of a start time and frequency.)
Display & key
Mode
Sign of setting parameters
for automatic measuremnt
Steps for selecting a mode
ex. Mode II is selected.
Step 1 Press and hold the
current mode is displayed.
Step 2 Press the
mode II.
Step 3 Press the
displays the clock.
Initializing the recorder
The measurement is performed every quarter hour.
The measurement is performed every half hour.
AUTO ON/OFF
key is pressed at rising and going to bed so that the
START
STOP
START STOP
AUTO ON/OFF key so as to display
START STOP
key. The recorder stores the mode and
Page 15
Selecting a mode
AUTO
ON/OFF
Saving a mode
key for about 3 seconds. The
Selection for the Automatic Measurement
START STOP
AUTO ON/OFF
of
START STOP