Using Menus - Dometic COOLAIR RTX 1000 Instrucciones De Uso

Using the parking cooler
I
NOTE
• When the parking cooler is in BOOST mode and switched to
standby mode, it will start the next time in AUTO mode.
• A running timer is set to 0 by switching the parking cooler in standby
mode.
• The parking cooler switches off completely after 12 hours in standby
mode to save power.
7.4 Switching off the parking cooler
➤ Press the
button for at least 3 seconds to switch off parking cooler.
✓ The parking cooler saves the current settings.
✓ The Power LED (fig. 2 7, page 4) goes out.
I
NOTE
• When the parking cooler is in BOOST mode and switched off, it will
start the next time in AUTO mode.
• A running timer is set to 0 by switching off the parking cooler.
• If the parking cooler is switched off while the compressor is still
operating, the fan will continue to run for 20 seconds to dry the
evaporator, among other things.
7.5

Using menus

You can set the parking cooler to suit your requirements using the menus:
➤ Press the
button to browse through the menus.
➤ Press the
or
change the selected value.
➤ Press the
button to reduce the selected value.
➤ Press the
button to increase the selected value.
I
NOTE
If you don't press any button for more than 5 seconds, the display
switches back to the menu mode.
16
button to navigate to the appropriate sub-menu or to
RTX1000/2000, SPX1200
EN