Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KSP 85 Fc Manual De Instrucciones

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth 0 /30 /45 /60
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable circular saw KSP 85 Fc complete with:
1 carbide-tipped circular saw blade Ø 230 mm ( 9 1/16 in.), 12 teeth
1 riving knife / splitter (thickness 2.0 mm / 1/16 in.)
1 hose connector
1 parallel guide fence
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
Sound power level
106 dB (A)
103 dB (A)
.
2
230 V~, 50 Hz or 110 V~, 50 Hz
2250 W (230 V) or 1800 W (110 V)
10 A (230 V) or 17 A (110 V)
4870 rpm or 4800 rpm
3300 rpm or 3000 rpm
85/75/62/42 mm (3 3/8, 2 5/16, 2 7/16, 1 ¾ in.)
0 – 60º
230/207 mm (9 1/16, 8 1/8 in.)
2,0 mm ( 1/16 in.)
2.5 mm ( 3/32 in.)
30 mm
35 mm ( 1 3/8 in.)
7.25 kg (16 lbs)
285 x 400 x 293 mm ( 9 7/8 x 12 1/8 x 9 ¼ in.)
Workplace-related emission value
95 dB (A)
92 dB (A)
-16-