AL-KO Solo T 22-111.7 HDS-A V2 Comfort Manual De Instrucciones página 43

Help in case of malfunction
Malfunction
Motor does not start.
Starter does not work.
Motor is losing power.
Lawn tractor is vibrating
severely.
Lawn tractor does not
move off.
Rough cut.
Cause
Lack of fuel.
Poor quality, contaminated
fuel, old fuel in tank.
Air filter contaminated.
No ignition spark.
Too much fuel in engine
combustion chamber due to
repeated starting attempts.
Starter battery flat or weakly
charged.
Safety switch on operator's
seat does not function.
Safety switch on brake pedal
does not function.
Mower mechanism switched
on.
Fuse on (+) cable of starter
battery.
Grass too long or too wet.
Air filter contaminated.
Carburettor setting incorrect.
Blades severely worn down.
Driving speed too fast.
Mower mechanism is dam-
aged.
With hydrostat drive: no trav-
el drive.
Blade worn, blunt.
Incorrect cutting height.
Remedy
Fill tank; check tank bleeding; check fuel
filter.
Always use fresh fuel from clean con-
tainers; clean carburettor (customer ser-
vice workshop).
Clean air filter (see operating instruc-
tions from engine manufacturer).
Clean the spark plug, replace with a
new one if necessary, check ignition ca-
ble, check ignition system (customer
service workshop).
Unscrew spark plug and dry off.
Charge starter battery.
Sit on operator's seat correctly; switch
defective.
Press brake pedal down fully.
Switch off mower mechanism.
Check fuse, replace if necessary.
Correct the cutting height; make clear-
ance for mower mechanism by moving
back a short distance.
Clean air filter (see operating instruc-
tions from engine manufacturer).
Have the setting checked (customer
service workshop).
Replace blades (customer service work-
shop).
Reduce driving speed.
Check mower mechanism (customer
service workshop).
Move bypass lever to operating position.
Renew or regrind blade. Reground
blades must be rebalanced (customer
service workshop)!
Correct the cutting height.
43