Preparing for Your New Portable Spa
•
#10 AWG wire is acceptable on wire run up to 20
meters. Wire run over 20 meters must increase to
#8 AWG gauge.
•
Please note that this is the only acceptable
electrical wiring procedure. Spas wired in any
other way will void your warranty and may result in
serious injury.
Before each use of your spa, you should check the
RCD. During this test, the spa should be operational.
RCD Hook-up
Page 6
1.
Press the test button on the RCD. The RCD will trip
and the spa will shut off.
2.
Wait 30 seconds and reset the RCD breaker. This
is accomplished by turning the breaker off then
back on. Your spa will be operational in about five
seconds.
3.
Your spa is now safe to use.
2007 Portable Spa Owner's Manual
LTR20071001, Rev. B