Maintenance; Every Month - Cal Spas Aqua SQ63 Manual Del Usaurio

Once A Week
1. Test water using Bromine Test Strips.
2. Based on the Test Strip readings:
• First, adjust total alkalinity (acceptable range of
80-120 ppm).
• Then, adjust the pH if needed (between 7.2 to
7.8).
• Check level of Bromine. (Maintain bromine at
1-2 ppm.)
Note: Adjust bromine cartridge setting up or down if
needed.
3. Add 2 oz of Cal Spas "Stain and Scale Defense".
4. Add 2 oz of Cal Spas "Oxidizer Shock". Run spa
for 15 minutes on High speed.
5. Remove dirty filter from the spa and rinse off. Set
aside to dry.
6. Place your clean, extra filter cartridge back into the
spa.
7. Vacuum debris from the bottom of your spa with
the "Spa Vacuum".
8. Replace cover.
2007 Portable Spa Owner's Manual
LTR20071001, Rev. B
Water Quality Maintenance

Maintenance

Regardless of which "Clear Water Plan" you are using,
you should also do the following:

Every Month

1. Deep clean your spa's filter. (Follow "filter cleaning"
instruction at beginning of "Clear Water Plan")
2. Check inside the equipment area for leaks,
rodents, and insects.
3. If a leak is discovered, contact your Cal Spas
dealer for service.
4. If you see evidence of rodents or insects, take
necessary actions to remove them and precautions
to prevent them from returning.
Every 3 To 4 Months
1. Drain and clean your spa with "Multi-Purpose
Cleaner".
2. Polish the acrylic surface with "Fast Sheen".
3. Clean and treat spa cover, pillows, and Cal Select
cabinet (if equipped) with "Cover Protector".
4. When re-filling your spa, follow your specific "Clear
Water Plan" Start Up procedures.
5. If you are using the Cal Clarity Automatic Bromine
Generator Clear Water Plan, don't forget to add
new TRU BLU sodium bromide to the water.
6. If you use the Cal Inline Sanitation System "Clear
Water Plan", don't forget to replace the Mineral and
Bromine Cartridges.
Once A Year
1. Clean and treat redwood spa cabinets and
gazebos with "Nu-Spa Redwood Stain Renew and
Brightener".
2. If you use the Cal Zone Quest 2000 Ozonator, you
will need to replace the ozone cartridge.
Check the filter cartridge pleats. If they are frayed,
replace the cartridge.
Page 29