Cal Spas Aqua SQ63 Manual Del Usaurio página 34

Cleaning and Maintenance
Fast Sheen (Spa finish protecting wax)
Cal Spas™ Fast Sheen is an
essential part of maintaining your
spa's finish. Through normal use,
the spa's finish can accumulate
dirt, oil, and calcium, causing a
rough feel and unsightly scum lines.
Cal Spas™ Fast Sheen is a non-
oil based wax that is specifically
formulated to protect the spa's finish
from the chemicals and minerals
associated with normal spa use.
The most effective solution to
minimize cleaning time is prevention.
When the following steps are
followed, the spa's finish will actually
start to resist most of the elements
that cause calcium build-up and
make scum line clean-up easier.
Prior to Spa Start-Up and Refilling
1. Spray Cal Spas™ Multi-Purpose Cleaner directly to
the spa's finish.
2. Wipe clean with a soft cloth.
3. Repeat on heavily calcified areas.
4. Wipe spa thoroughly with a wet sponge, rinsing
often in a bucket of clean water.
5. Allow the spa to dry completely.
6. Apply a coat of Cal Spas™ Fast Sheen to the spa's
entire finish with a soft cloth or sponge.
7. Allow Fast Sheen to dry until white and powdery.
8. Buff clean with a soft cloth, rotating frequently.
IMPORTANT: Cal Spas™ Fast Sheen should not be
used on spas full of water. Only apply to clean, cool,
dry surfaces. Incorrect product usage may cause water
clarity issues.
Page 32 2007 Portable Spa Owner's Manual
LTR20071001, Rev. B