Deleting A Title Sequence; Fader Start - IMG STAGELINE DMP-240 Manual De Instrucciones

3) If the player unit has been set to pause, start the
GB
replay with the button
4) To go to other titles, turn the knob TRACK /
ENTER back and forth accordingly.
5) To end the replay of the title sequence, press
the button BACK for the required time.

5.12.3 Deleting a title sequence

1) Press the button PROG until the display shows
(delete all).
2) Turn the knob TRACK / ENTER (7) one step so
that "YES" (
text line (N).
3) To delete, press the knob TRACK / ENTER or to
abort the deleting process, press the button
BACK (8). The title sequence will also be
deleted when the DMP-240 is switched off.
22
(18).
) will be selected in the

6 Fader Start

From a mixer with fader start function, it will be pos-
sible to remote-control the function Start / Pause of
the button (18). Connection to the mixer is
described in chapter 4, step 3. Set the DMP-240 to
the type of fader start of the mixer:
1) Press the button MODE (9). The display will
show and
2) Turn the knob TRACK / ENTER (7) until
and are displayed.
3) Press the knob TRACK / ENTER. The display
will show and the current setting:
- - - - - control with an on / off switch
This setting must be selected for
most mixers of the "img Stage
Line" range. When the fader is
advanced, a switch starting the
replay will be closed in the mixer.
When the fader is closed, the
switch will open and set the
DMP-240 to pause.
control with a momentary push-
- - - - - -
button switch
When the momentary pushbut-
ton switch is actuated for the first
time by advancing the corre-
sponding fader, the replay will
start. When the momentary
pushbutton switch is actuated for
the second time by closing the
fader, the DMP-240 will be set to
pause.
return to a Cue point by elec-
tronic pulse control
When the fader is closed, the
player will return to the beginning
of the title or to a Cue point set
with the button CUE (17) and will
then be set to pause.
4) Turn the knob TRACK / ENTER to select the
required setting.
5) To return to the time indication, press the button
BACK (8) twice.
.