Compiling An Individual Title Sequence - IMG STAGELINE CD-112 Manual De Instrucciones

5.7 Anti-shock memory
GB
The CD player is equipped with an anti-shock
memory which is able to compensate interrup-
tions (40 seconds max.) caused by shocks or
vibrations when replaying a CD. For testing,
press the button ESP (21) on the remote control
to deactivate the anti-shock memory (not in MP3
mode). The display (5) will briefly show "ESP
OFF". To reactivate, press the button ESP once
again. The display will briefly show "ESP ON".
5.8 Compiling an individual
title sequence
For replaying a selection of titles in a certain
order, a sequence of up to 64 titles can be pro-
grammed. For this purpose, in case MP3 files,
the arrangement of the folders should be known
to you ( chapter 5.3.4) as it will be necessary
to enter the corresponding number of each title
to be programmed.
1) Set the CD player to the stop mode; press the
button STOP (10), if required.
2) Activate the programming mode with the but-
ton PROG (8). Press all other buttons within
15 seconds otherwise you will exit the pro-
gramming mode. In this case, press the but-
ton PROG once again. The display will show:
— for a CD without MP3 files
PROGRAM
CD P – 01 00
— for a CD with MP3 files
PROGRAM
P – 01 000 0000
3) For CDs without MP3 files, skip this step and
directly proceed with step 4.
For MP3 files, first select the number of the
folder containing the first title desired for the
title sequence. This is also necessary when
10
all the files are in the ROOT directory without
folder. In this case, enter 1 as the folder num-
ber.
Select the folder number with the buttons
REV – SKIP – CUE (9) or with the numerical
keys (3). To memorize, press the button
PROG. The four zeroes will flash as a prompt
to enter the title number.
4) Select the number of the first title of the title
sequence with the buttons REV – SKIP – CUE
(9) or enter it with the numerical keys (3). For
MP3 files in folders, please note that these
files are not arranged consecutively but that
the first file in each folder is always number 1.
5) To memorize press the button PROG. The
display will show the next memory location
number, e. g. "P – 02".
6) Repeat steps (3), 4 and 5 for all further titles
desired until the entire title sequence has
been programmed.
7) To start the title sequence, press the button
PLAY/ PAUSE (11). The upper line of the dis-
play will show "MEM" (memory) and the title
sequence will be replayed.
8) Press the buttons REV – SKIP – CUE to select
any title of the title sequence or keep the cor-
responding button pressed to activate the fast
forward / reverse function within a title.
9) The replay will stop after the title sequence
has been replayed or when you press the but-
ton STOP. To restart the title sequence, first
press the button PROG, then the button
PLAY/ PAUSE.
Note: A programmed title sequence will be deleted
when you change the sound carrier, when you press the
button FUNC (17), when you press the button STOP in
the programming mode and when you switch off the
player.
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
6 Maintenance
Protect the player from dust, vibrations, humidity
and heat (admissible ambient temperature
range 0 – 40 °C). For cleaning only use a dry,
soft cloth; never use water or chemicals.
Note concerning sound interruptions and
reading errors
Cigarette smoke and dust will easily penetrate
through all openings of the unit and will also set-
tle on the optics of the laser sampling systems. If
this deposit should cause reading errors and
sound interruptions, the unit must be cleaned by
skilled personnel. Please note that there will be
a charge on cleaning, even during the warranty
period!
7 Specifications
Frequency range: . . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . < 0.1 %
Channel separation: . . . . > 60 dB
Dynamic range: . . . . . . . . > 96 dB
S/N ratio: . . . . . . . . . . . . . > 70 dB
Audio output: . . . . . . . . . . 1.2 V
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 50 VA max.
Ambient temperature: . . . 0 – 40 °C
Dimensions (W × H × D): . 482 × 44 × 265 mm,
Weight: . . . . . . . . . . . . . . 4 kg
Subject to technical modification.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction
1 rack space