Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Rear and center speakers
Rear speaker
(R)
Receiver
SURROUND SPEAKERS
R
REAR L
CENTER
} ]
R
L
IMPEDANCE USE 8-16 Ω
Active woofer
Receiver
Active woofer
MIX
AUDIO
OUT
If you have an additional front speaker system
Connect them to the FRONT SPEAKERS B terminals.
If your TV monitor uses separate speakers
You can connect one of them to the SURROUND
SPEAKER CENTER terminals for use with Dolby Pro
Logic Surround Sound (see page 18).
Selecting the impedance
Set the IMPEDANCE SELECTOR for the front speakers
as indicated in the table below. Check the instruction
manual of your speakers if you're not sure of the
impedance. (This information is usually printed on a
label on the back of the speaker.)
if nominal impedance of
Set IMPEDANCE SELECTOR to
your speaker is
Between 4 and 8 ohms
8 ohms or higher
Selecting the speaker system
If you connect only one set of front speakers, set the
SPEAKERS selector on the front panel to A. If you
connect two sets of front speakers, see the following:
To drive
Speaker system A (connected
to the FRONT SPEAKERS A
terminals)
Speaker system B (connected
to the FRONT SPEAKERS B
terminals)
Both speaker systems A and
B (parallel connection)
*Do not use A+B with SOUND FIELD set to ON.
Rear speaker
Center speaker
(L)
} ]
} ]
INPUT
4 Ω
8 Ω
Set SPEAKERS selector to
A
B
A+B*
Where do I go next?
To complete your system, go to "AC Hookups" on page 8. If
you want to connect video components to enjoy surround
sound when watching TV programs or video tapes, go on to
the next section.

TV/VCR Hookups

Overview
This section describes how to connect video
components to the receiver. For specific locations of the
jacks, see the illustration below.
MONITOR
TV
VIDEO 2
VIDEO 1
What cables will I need?
• Audio/video cable (not supplied) (1 for each TV or LD
player; 2 for each VCR)
Yellow
White (L)
Red (R)
• Video cable (not supplied) (1 for a TV monitor)
Yellow
Hookups
The arrow ç indicates signal flow.
TV or Digital Broadcasting System (DBS) tuner
Receiver
TV/DBS
CTRL S
STATUS IN
VIDEO
IN
AUDIO
IN
L
R
Getting Started
Yellow
White (L)
Red (R)
Yellow
TV
or
DBS tuner
OUTPUT
VIDEO
AUDIO
L
R
(continued)
7
EN

Capítulos

Tabla de contenido
loading

Tabla de contenido