Antenna Hookups; Audio Component Hookups - Sony STR-DE705 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Antenna Hookups

Overview
This section describes how to connect AM and FM
antennas to the receiver. If you want to receive radio
broadcasts with the receiver, complete these
connections first, then go to the following pages.
For specific locations of the terminals, see the
illustration below.
ANTENNA
What antennas will I need?
• FM wire antenna
(supplied) (1)
Hookups
FM wire antenna
Receiver
ANTENNA
FM
After connecting
75Ω
COAXIAL
the wire antenna,
keep it as horizontal
as possible.
If you have poor FM reception
Connect a 75-ohm coaxial cable (not supplied) to an FM
outdoor antenna.
FM outdoor antenna
Receiver
ANTENNA
FM
75Ω
COAXIAL
• AM loop antenna
(supplied) (1)
AM loop antenna
AM
AM
Connecting a ground wire
To prevent hum, connect a ground wire (not supplied)
to the y ground terminal. If you've connected an
outdoor antenna, be sure to connect the ground for
lightning protection.
Receiver
to ground
Where do I go next?
If you want to connect other components, go on to the next
section. If you're only planning to use the receiver to listen
to the radio, go to "Speaker System Hookups" on pages 6
and 7.

Audio Component Hookups

Overview
This section describes how to connect your audio
components to the receiver. If you want to use the
receiver as an amplifier, complete these connections.
For specific locations of the jacks, see the illustration
below.
S-LINK CTRL A1 jack
TAPE
PHONO
DAT/MD
CD
What cords will I need?
Audio cords (not supplied) (1 for each CD player and
turntable; 2 for each tape deck, DAT deck, or MD deck)
White (L)
Red (R)
Getting Started
.
White (L)
Red (R)
(continued)
5
EN

Capítulos

Tabla de contenido
loading

Tabla de contenido