Tables Of Scheduled Maintenance And Checks; Protect The Environment - Benelli macis Manual Usuario

MAINTENANCE
78
TABLES OF SCHEDULED MAINTENANCE AND
CHECKS
Impropriety or lack of recommended
maintenance operations can lead to an
increase of the risk of accidents and
damage to the scooter. Always use genuine
Benelli QJ. spare parts. Using non-genuine spare parts
can accelerate the wear of your motorcycle and
shorten its life. Failure to perform the recommended
operations, as well as using non-genuine spare parts,
can cause the unoperativeness of the legal guaranty.
To replace or top up the lubricants and fluids of your
scooter, use only the suitable products.

PROTECT THE ENVIRONMENT

Benelli Q.J., in order to protect the interests
of the community, awakens Custumers and
the Technical Assistance operators to use
the veichle and dispose of its replaced parts
respecting the laws in force concerning
environmental pollution and waste disposal and
recycling.
The main periodic checks and maintenance
operations are shown in the following tables. These
operations are necessary to keep the scooter safe and
in perfect running order. The intervals indicated in the
periodic maintenance and lubrication tables must be
intended as a general guide under normal riding
conditions. It could be necessary to reduce these
intervals according to the climate, the ground
conditions, the geographic position and the
conditions of use.
Some of the operations can be carried out by the user,
providing he or she possesses the requisite skills and,
however, only when explicitly scheduled in this Owner's
Manual. In any other case have the operations
performed by a Benelli Authorized Workshop, whose list
is available on the web site www.benelli.com or calling
the Benelli Coustomer Service dialling +39 0721.418740.
As a rule maintenance operations must be
performed while the scooter is on the rear
stand after switching off the engine and
setting the start switch to OFF. On the
contrary, while checking the fluid levels it is advisable to
keep the motorcycle in an upright position without
using the rear stand.
TABLES OF SCHEDULED MAINTENANCE
NOTE :
• The annual checks must be performed every year,
except if a kilometer-based maintenance is performed
instead.
• From 14.000 Km, repeat the maintenance intervals
starting from 10.500 Km.
◙
• Items marked with an should be performed by a Be-
nelli dealer as they require special tools, data and
technical skills.
Code:
I = inspection and adjustment,cleaning,oiling, or
change according to need.
R = change
T = tighten
◙
= dealer
MAINTENANCE