Tabla de contenido
MAINTENANCE
66
All manuals and user guides at all-guides.com
TABLES OF SCHEDULED MAINTENANCE AND CHECKS
Impropriety or lack of recommended
maintenance operations can lead to an increase
of the risk of accidents and damage to the scooter.
Always use genuine Benelli QJ. spare parts. Using non-genuine
spare parts can accelerate the wear of your motorcycle and
shorten its life.
Failure to perform the recommended operations, as well as
using non-genuine spare parts, can cause the unoperativeness
of the legal guaranty.
To replace or top up the lubricants and fluids of your scooter,
use only the suitable products.
PROTECT THE ENVIRONMENT
Benelli Q.J., in order to protect the interests of the
community, awakens Custumers and the Technical
Assistance operators to use the veichle and dispose
of its replaced parts respecting the laws in force concerning
environmental pollution and waste disposal and recycling.
The main periodic checks and maintenance operations are
shown in the following tables. These operations are necessary
to keep the scooter safe and in perfect running order.
The intervals indicated in the periodic maintenance and
lubrication tables must be intended as a general guide under
normal riding conditions. It could be necessary to reduce these
intervals according to the climate, the ground conditions, the
geographic position and the conditions of use. Some of the
operations can be carried out by the user, providing he or she
possesses the requisite skills and, however, only when explicitly
scheduled in this Owner's Manual. In any other case have the
operations performed by a Benelli Authorized Workshop,
whose list is available on the web site www.benelli.com or
calling the Benelli Coustomer Service dialling +39 0721.418740.
As a rule maintenance operations must be
performed while the scooter is on the rear stand
after switching off the engine and setting the start
switch to OFF. On the contrary, while checking the fluid levels it
is advisable to keep the motorcycle in an upright position
without using the rear stand.
TABLES OF SCHEDULED MAINTENANCE
NOTE :
• The annual checks must be performed every year, except if a
kilometer-based maintenance is performed instead.
• From 14.000 Km, repeat the maintenance intervals starting
from 10.500 Km.
◙
• Items marked with an
should be performed by a Benelli
dealer as they require special tools, data and technical skills.
Code:
I = inspection and adjustment,cleaning,oiling, or change
according to need.
R = change
T = tighten
◙
= dealer
MAINTENANCE
Tabla de contenido
