Putting Out Of Operation; Maintenance And Cleaning - Abicor Binzel DAV Guia De Instalacion

DAV
7 Operation

8 Putting out of operation

9 Maintenance and cleaning

NOTE
• The DAV wire cutting device must only be put into operation by
authorised personnel (in Germany see TRBS 1203).
• Observe the operating instructions for the welding components.
NOTE
• As the DAV wire cutting device is integrated into a welding system,
putting out of operation depends on the robot control.
• Please make sure that the shutdown procedures for all components
integrated in the welding system are strictly observed.
Scheduled maintenance and cleaning are prerequisites for a long service life
and trouble-free operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power supply.
• Close off the compressed air supply.
• Disconnect the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and
damage.
• Replace any damaged, deformed or worn parts.
7 Operation
EN - 15