Electrical Connection; Electrical Connections; Extension Cables - Fox F36-255 Manual De Instrucciones

ELECTRICAL CONNECTIONS

Use 230 V 50 Hz alternate voltage equipped with a earthing conductor to supply your machine.
Ensure that the power supply corresponds to this voltage, that it is protected by a differential and
magnetothermal switch, and that the earthing system is efficient. If your machine does not work
when connected to a socket, check carefully the power supply features.

EXTENSION CABLES

Only use three conductors extension cables, with a plug with two plugs and a earthing contact and
sockets with two holes and a earth corresponding to the plug of the tool. When using an electric
tool at a remarkable distance from the power supply, use an extension cable with sufficient
dimensions to transport the current which the tool needs. If the extension cable has not the
sufficient dimensions a voltage drop can occur, thus causing an overheating and a voltage loss.
You can only use extension cables which are in compliance with CE standards.
Extension cable length:
Cable dimensions:
Before using any kind of extension cable, check that it has not bare wires and that the insulation is
not cut or worn. Repair and change immediately it if it is damaged or worn.
WARNING:
Extension cables must be arranged away from the working area in order that they do not get in touch
with the workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
EN

ELECTRICAL CONNECTION

up to 15 m
3 x 2,5 mm²
33