Adjusting Of The Tip Cap; Maintenance - Vermeiren Inovys II-F Manual De Instrucciones

3.11 Adjusting of the tip cap

L
Risk of injury - Make sure that the spring button  is locked after
WARNING:
adjusting the tip cap.
A tip cap is mounted on the lower back frame that can be adjusted in its height depending on
the seat height of the wheelchair.
The tip cap can be placed in 3 different positions with a difference of 20 mm.
4

Maintenance

For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.com.
Press the spring button Ⓐ.
1.
2. Press the tip cap tube into the frame
tube or out the frame tube until the
desired position is reached.
Loosen the spring button Ⓐ.
3.
Check that the spring button Ⓐ is
4.
securely fixated.
Page 23
Inovys II-F
2016-05