Adjusting Of The Footrests; Length Of The Footrests - Vermeiren D400 Manual De Instrucciones

2
3.6

Adjusting of the footrests

3.6.1 Length of the footrests

L L L L
CAUTION:
Risk of damage – Avoid that the footplates make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
3.6.2 Adjusting the footplates
The footplates can be used in 2 positions. Standard they are adjusted with the base plate in
the back position.
The footplates can be adjusted to the front by switching the left and right footplate.
3.6.3 Adjusting angle footplates
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts
6. Check working of the brakes.
7. If necessary repeat the above steps until the
3
brakes are adjusted well.
Adjust the length of the footrests as follow:
1. Remove the screw
footrests).
2. Adjust the length of the footrests to a
comfortable length.
3. Tighten the screw
100°
Page 20
2013-06
so the brake
.
.
(on the back of the
properly.
80°
D400
to